| Category: | Wedge Wire Screen Cylinders |
| Material: | stainless steel |
| Properties: | wedge wire screen |
| Application: | oil well , water well , geothermal well , sewage and industrial wastewater disposal plants, food equipment, liquids filtration,cleaning treatment |
con-slot screens
UBO is a factory of wedge wire screen, if you have picture , we will be drawing for you .
ubo can produce wedge wire screen ,wedge wire filter, candle filter, filter pipe .
Material:stainless steel 304,316,316l,320,Hastelloy C
Wire diameter: 1.5X2mm, 2x3mm, 3x6mm
Length: MAX 6 meters.
Diameter:MAX 280mm
Slot size: 0.10, 0.15, 0.20, 0.25, 0.30,....., 3.00 also achieved upon request.
Slot Width Tolerance
Slot width shouldn't exceed 0.02mm and shouldn't less than 0.01mm compare to standard size when slot width is below 0.2mm
Slot width should be controlled within ± 0.02mm compare to standard size if slat width is bigger than 0.25mm
Plating
Hard plating the wedge bar surface, plating thickness is 0.20-0.30mm. surface hardness >HRC : 60-66 (HV700-900)Product structure : wedge wire screen and stainless steel pipe
Surface treatment: polishing
Use for :oil well , water well , geothermal well , sewage and industrial wastewater disposal plants, food equipment, liquids filtration,cleaning treatment
Clients : CNPC, CPDC in china , PEPSICO, COCA-COLA, CARGILL, COMEXPORT, NJS in the world .
Wire diameter: 1.5X2mm, 2x3mm, 3x6mm
Length: MAX 6 meters.
Diameter:MAX 280mm
Slot size: 0.10, 0.15, 0.20, 0.25, 0.30,....., 3.00 also achieved upon request.
Slot Width Tolerance
Slot width shouldn't exceed 0.02mm and shouldn't less than 0.01mm compare to standard size when slot width is below 0.2mm
Slot width should be controlled within ± 0.02mm compare to standard size if slat width is bigger than 0.25mm
Plating
Hard plating the wedge bar surface, plating thickness is 0.20-0.30mm. surface hardness >HRC : 60-66 (HV700-900)Product structure : wedge wire screen and stainless steel pipe
Surface treatment: polishing
The outside of each section is banded with steel bar and lengths of steel strips are supplied to provide a seal between sections. Typically, the screen has .030" to .040" slot openings to hold back the solids and allow liquids to pass through.
The lauter tun screen sits on a ledge that is positioned on the inside diameter of the tank. It may also be necessary to have support beams depending on loading and tank diameter.
Example of Lauter Tun screen description
Tel
WhatsApp
Message
Email