| Category: | Metal Sintered Filter Elements |
| Material: | Stainless Steel sintered mesh,Metal Fiber |
| Properties: | Sintered filter |
| Application: | Filtration |
The Sintered Metal Felt Filter Cartridge are manufactured with sintered metal micro-fibers, uniformly distributed to create a 3D filtering structure. The metal felt cartridge are specifically designed for viscous or corrosive fluids, or those with high viscosity.
3 times greater dirt holding capacity than conventional metal cartridges
Double the porosity and permeability than sinter metal power cartridges
4 times higher flow rate than conventional metal cartridges
No media migration or fiber release
Excellent mechanical strength
Reclothing design available
-- High temperature fluids
-- High viscosity fluids
-- Toxic or hazardous fluids
-- Hydraulic oil
-- Natural or process gases
-- Process steam
-- High differential pressure
-- Corrosive liquids and gases
-- Cryogenic fluids
-- Electronic grade liquids or gases
-- Precious particulate recovery
-- Sterilization steam
Sintered Metal Felt Filter Cartridge technical criteria and deviation
|
Specifiction μm(c) |
Micron μm(c) |
Pressure of Bubble Point (pa) |
Air Permeability L/(min.dm2) |
Pore Opening (%) |
Pollutant Carry Capacity (mg/cm2) |
Thickness (mm) |
Breaking Strength (MPa) |
||||||
| Basic Value | Dev. | Basic Value | Dev. | Basic Value | Dev. | Basic Value | Dev. | Basic Value | Dev. | Basic Value | Dev. | ||
| SF5 | 5 | 6800 | +10% | 47 | +10% | 75 | +10% | 5.0 | +10% | 0.30 | +10% | 32 | +10% |
| SF7 | 7 | 5200 | 63 | 76 | 6.5 | 0.30 | 36 | ||||||
| SF10 | 10 | 3700 | 105 | 75 | 7.8 | 0.37 | 32 | ||||||
| SF15 | 15 | 2450 | 205 | 79 | 8.6 | 0.40 | 23 | ||||||
| SF20 | 20 | 1900 | 280 | 80 | 15.5 | 0.48 | 23 | ||||||
| SF25 | 25 | 1550 | 355 | 80 | 19.0 | 0.62 | 20 | ||||||
| SF30 | 30 | 1200 | 520 | 80 | 26.0 | 0.63 | 23 | ||||||
| SF40 | 40 | 950 | 670 | 78 | 29.0 | 0.68 | 26 | ||||||
| SF60 | 60 | 630 | 1300 | 85 | 36.0 | 0.62 | 28 | ||||||
1) Material:SUS316L
2) Micron:5-60um
3) Could add protected mesh on both side
Tel
WhatsApp
Message
Email