Graco Inlet Filter Strainer

Product Code: 2107
Category:Filter Strainer
Material:Stainless steel 304
Properties:filter strainer
Application:Petroleum, chemical, food, environmental protection, heavy machinery, film, medicine, water treatment

Email to Us Start Order


Email:sales@ubooem.com

Description of Graco Inlet Filter Strainer


Essential to maintaining your finishing equipment and eliminating down time, paint spray filters will prolong the life of your high pressure hose and airless paint sprayer, while allowing you to be most efficient. Whether you require Graco airless, Wagner airless or air assisted airless filters in various mesh sizes, you can always find the right paint filters to best fit your job.

It is advised to filter your spray coating multiple times before it reaches the spray gun. The use a rock catcher, manifold filter or screen filter at the pump end will ensure no large debris gets passed through into the high pressure hose. Then once again before applying the spray coating, a spray tip filter or gun handle filter should be used to guarantee no small particles will clog your airless spray tip.

As you approach the spray gun end, a higher mesh filter should be used. If using an air assisted airless sprayer, it is recommended to use a micro filter as well, which will be placed directly behind the hose spray nozzle and allow for you to achieve the fine finish results.

 

Applications for Graco Inlet Filter Strainer:

 

Petroleum, chemical, food, environmental protection, heavy machinery, film, medicine, water treatment, high temperature gas filtration.


Advantages for Graco Inlet Filter Strainer:

 

1) Easy to exchange – clean filter housing

When removing the new Wagner filter all dirt collected by the filter is removed. This is achieved by filtering from the inside to the outside. Collecting all dirt inside the filter. Only filtered material is between the filter and the filter housing. Therefore the filter can be removed, even when full, very easily without sticking to the housing because of dried dirt.

2. Longer filter life time - bigger chamber for dirt

The new filter is designed to have a bigger chamber to collect more dirt. The chamber is 53% times bigger compared to the standard Airless filter. So the lifetime of the filter is extended. This reduces the downtime for filter cleaning to a minimum.

3) Easy to flush - fast colour change

No spring is needed to keep the filter in position. The dead space free filter design increases the flushablility and accelerates color change. The result is time and solvent saving.

4) Easy to mount - no wrong assembly

Due to its design the filter cannot be assembled in the wrong way, reducing the downtime to a minimum.

5) Lighter gun due to compact filter design

The size of a filter influences the size and weight of a gun. The new compact filter design supports a small and light weight gun offering a more ergonomical gun combined with a longer filter life time.


Graco Inlet Filter Strainer

Specification of the Graco Inlet Filter Strainer



Nominal Grade
filter mesh
mean pore
Filtration Ratings (microns)
2
325*2300
5
2
5
200*1400
10
5
10
165*1400
15
10
20
165*800
20
20
40
325*325
43
40
60
250*250
61
55
80
200*200
74
75
100
150*150
104
100

Production And Sales of Graco Inlet Filter Strainer


Each product is packed with bubble bag and then few bags to a wooden case (fumigation certificate)

Tel
WhatsApp
Message
Email
Contact Us
Name:Xueyi Ma
Tel:+86 311 8595 5658