which toughness is better for the stainless steel sieve plates and punching meshes

Which toughness is better for the stainless steel sieve plates and punching meshes？

Stainless steel sieve plates and the punching meshes are both  not strange to us, but on earth which kind of toughness is better?

The corrosion resistance of the stainless steel sieve plates decreased with increasing carbon content, so most of the low carbon content of the stainless steel sieve plates, some steel wC (carbon content) even less than 0.03% (such as 00Cr12). Stainless steel sieve plate is the main alloying element in Cr, only when the Cr content reaches a certain value, the corrosion resistance of steel. Therefore, the stainless steel sieve plate wCr over 13%. Stainless steel also contains Ni, Ti, Mn, n, Nb,Mo,si and other elements.

The corrosion resistance of the stainless steel sieve plates decreased with increasing carbon content, so most of the stainless steel with low carbon content, some steel wC (carbon content) even less than 0.03% (such as 00Cr12). Stainless steel is the main alloying element in Cr, only when the Cr content reaches a certain value, the corrosion resistance of steel. Therefore, the wCr over 13% of stainless steel. Stainless steel also contains Ni, Ti, Mn, n, Nb,Mo,si and other elements.

Corrosion resistance of stainless steels with carbon content decreased, so most of the stainless steel with low carbon content, some steel wC (carbon content) even less than 0.03% (such as 00Cr12). Stainless steel is the main alloying element in Cr, only when the Cr content reaches a certain value, the corrosion resistance of steel. Therefore, the wCr over 13% of stainless steel. Stainless steel also contains Ni, Ti, Mn, n and Nb,Mo,si elements, such as the use of low-carbon stainless steel wire.

No matter which kind for the toughness of the stainless steel seive plates and the punching meshes is better, UBO can provide  you the best product and the service as your request!