Maintenance method of stainless steel washing coal screen

Washing coal screen because of its characteristics has been favored by many industries, you may not be very familiar with stainless steel washing coal screen, so today we will introduce the characteristics of stainless steel washing coal screen, next let's have a look!
The stainless steel washing coal screen has the advantages of high screening rate, wear resistance and toughness. The mesh section is trapezoid. The gap is narrow at the top and wide at the bottom. It is a screen bar made of stainless steel wire by cold rolling. The support bar is welded by screen production equipment. The screen seam is uniform, the welding quality is stable, the opening rate is high, the service life is long, and it has high strength, steel degree and bearing capacity. It can be made into a steel screening and filtering device of various shapes.
The mineral screen is a stainless steel metal structure element used for screening and filtration. It is widely used in screening, filtration, dehydration, desliming and other operations in many industries. It has high strength, rigidity and bearing capacity, and can be made into rigid screening and filtering devices of various shapes. Easy to leak, wear-resistant and corrosion-resistant. The mesh section is trapezoid and the gap is narrow at the top and wide at the bottom.
Stainless steel coal washing screen is mainly used for coal washing and other industries, mainly for screening, coal washing and so on. We need to maintain the washing coal screen when it is used for a long time. Today, I'd like to introduce 5 maintenance techniques to make the screen look new without affecting the work.
1. When the stainless steel is used to wash the coal screen for maintenance, the surface polluted by grease, oil and lubricating oil can be wiped clean with soft cloth, and the neutral detergent or ammonia solution or detergent cleaned after use can be used.
2. For surface dust and easy to remove dirt, it can be cleaned with soap and detergent or warm water. Trademark, stainless steel on the surface of membrane, washed with warm water, weak detergent, adhesive composition, scrubbed with alcohol or organic solvent (ether, benzene).
3. Rust caused by screen surface pollution can be cleaned with 10% nitric acid or abrasive cleaner, or with special cleaning.
4. There are rainbow lines on the surface of stainless steel screen, and the neutral detergent is washed with warm water when excessive detergent or oil is used.
5. In case of pollution on the surface of washed coal screen, wipe it with bleach and wash it with water immediately. Then soak it in ammonia solution or neutral soda carbonate solution and wash it with neutral detergent or warm water.
The above five points are the maintenance methods of the stainless steel screen used in coal mine. Have you learned them?